Water Leak Detection Sydney
We Find It Leak Detection locates hidden water leaks across Sydney, in walls, slabs, floors, ceilings and underground service pipes.
Wednesday Leak Detection Deal
Call Now & Get $65 Off Your First Service
Our water leak detection in Sydney carries a $0 call-out fee, plus Same Day Service.
-
Honest Diagnosis
-
$0 Call-Out Fee
-
Same Day Service
-
Lifetime Labour Warranty
Pinpointing Hidden Water Leaks Before Anything Opens
Is your meter ticking with taps off? Sydney Water's check needs every tap and water appliance off for at least an hour, and movement means a concealed leak. Our licensed team traces the pipe.
Hidden Water Leak Detection Services
Hidden water leak detection starts from where the water shows, and we match the leak locating method to that spot:
-
Underground Leak Detection
Get a quoteSydney Water says a green lawn patch, unlike the surrounding grass, can mean a buried pipe leak. Our underground leak detection traces that service pipe between the meter and house.
-
Wall Leak Detection
Get a quoteWhen paint bubbles on a wall, a service pipe can be leaking inside the cavity behind it. We pinpoint that leak with wall leak detection before anyone opens the plaster.
-
Slab Leak Detection
Get a quoteWe trace a slab leak along a water line buried in the concrete. Our slab leak detection finds the leak before anyone cuts concrete, so one small section comes up.
-
Ceiling Leak Detection
Get a quoteTracing a ceiling stain starts at the bathroom or pipe run directly above it. With ceiling leak detection, we follow that stain back to the leaking service pipe or fitting.
-
Hot and Cold Lines
Get a quotePipe leak detection covers the cold water line and heated line. A separate test on each line shows whether the leak sits on the hot line or the cold one.
-
Leak Reports for Claims
Get a quoteIf you claim Sydney Water's hidden leak allowance, the application asks for details including the plumber's business name, licence number and invoice. We hand those details over with the repair.
What Causes a Hidden Water Leak
A hidden water leak commonly starts with high water pressure, a leaking tap at the meter or corroded flexi hoses:
-
High Water Pressure
Sydney Water's network averages 52 metres head (the height pressure lifts water), and some customers top 100 metres head. High pressure can break pipes, says the Water Pressure Management Program.
-
Leaking Meter Taps
When the meter tap (the tap beside your meter) leaks, the owner is responsible. Sydney Water still fixes it free within 10 working days, or within 3 hours for a fee.
-
Corroded Flexi Hoses
Flexi hoses caused one in ten of the home insurance claims Suncorp processed in 2025. Standards Australia says the 2025 AS/NZS 3500.1, the water services standard, adds hose rules.
-
Low-Lying Streets
Sitting low in a supply zone raises pressure, because the reservoir sits higher above the property. Sydney Water cuts pipe breaks using pressure reduction valves, which lower water main pressure.
How Much Water Leak Detection Costs
Water leak detection costs $450 for the first hour on Sydney Water's 2026 WaterFix Concealed Leaks list:
- First hour: Sydney Water's 2026 list charges $450 for the first hour and $130 per extra half-hour. Sydney Water quotes repairs separately.
- Obvious or no leak: Sydney Water sets a $260 minimum on its 2026 list when the leak is obvious or there's none. A meter check shows whether a search is needed.
- Our pricing: We Find It Leak Detection keeps a $0 call-out fee and fair, upfront pricing, no surprises. Search time and line count drive the final cost.
Why Early Detection Saves Money
Sydney Water's hidden leak allowance covers only half of one quarter's usage charge, leaving the rest on your bill:
-
Allowance Covers Half
Sydney Water's allowance takes "50% of the water usage charge" off the worst-hit quarter. Each property can claim it once every 5 years, within a year of the leak repair.
-
Detection Before Demolition
If the leak shows or the linings are coming out, cutting in makes sense. Otherwise, non-invasive leak detection marks the spot, instead of cutting into walls and floors to search.
-
Energy Lost on Hot Lines
Losing water from a hot line wastes heating energy too, according to Sydney Water. We locate and fix that line, so you stop paying to heat water you never use.
Our Process
Our plumber works in five steps, from the water meter test to isolating, tracing, marking, then repair and retest:
-
Meter Test First
Our plumber reads the water meter with every tap and water appliance shut, confirming any escaping water and its rate. You see that proof before you pay for a search.
-
Isolate Each Section
When the dial keeps moving, we isolate and test garden taps, the house supply and each hot or cold line separately. Each step narrows the search to one pipe run.
-
Listen and Trace
Tracing starts with pipe location, then acoustic listening, using a microphone that picks up water leaving a pressurised pipe. A safe tracer gas helps us detect and locate the leak.
-
Mark the Leak
We mark and report the exact leak spot, then set out the fix in a written quote. Best Price Guaranteed covers that written quote before any repair work starts.
-
Repair and Retest
Once the spot is marked, leaking pipe repairs go through one small opening. A second meter test then shows the line holding, with the dial still and every tap off.
Common Water Leak Problems We Fix
Four common signs point to a concealed leak on the water service, and each is fixable once found:
-
Meter Turning With Taps Off
If the meter dial keeps ticking with all taps off, water is leaking somewhere on the property. We locate that leak, so the fix touches one spot, not a room.
-
Damp Patch Near the Skirting
Damp patches inside the house can mean a leak, Sydney Water says. Near the skirting, we test for a water service leak behind the lining before anything is pulled off.
-
Green Patch in Dry Weather
We look for a lawn patch that stays green in dry weather, which Sydney Water links to a leaking buried pipe. From there, we follow the pipe to the leak.
-
Bill Up With Steady Use
When the water bill climbs while use holds steady, Sydney Water treats that as a leak sign. A meter check comes first, then we trace where the extra water goes.
Why Choose We Find It Leak Detection
You get plain answers, a $0 call-out fee, a phone line open 24 hours and our Lifetime Labour Warranty:
-
Honest Answers
We tell you exactly what's leaking, where, and which fix suits it, in plain words. We do the work under contractor licence 498750C, issued by NSW Fair Trading, which covers water plumbing.
-
No Call-Out Charge
Getting us to your door costs nothing with our $0 call-out fee. After that, you get fair, upfront pricing, no surprises, with the full price agreed before any work begins.
-
Answered 24 Hours
A real person answers our phones 24 hours a day for same-day emergency service. Same Day Service then gets the team to your door on the day you ring us.
-
Labour Covered for Life
When we fix the leaking pipe, the work comes with our Lifetime Labour Warranty. That job also carries Quality Workmanship Guaranteed, so you know who stands behind the finished work.
Areas We Service
We Find It Leak Detection runs residential water leak detection across Sydney, from the Eastern Suburbs, Inner West and North Shore to the Northern Beaches and Hills District. We also cover Western Sydney, South West Sydney and the Sutherland Shire.
Book Water Leak Detection in Sydney
When bills rise with steady use, calling (02) 9073 7896 books Same Day water leak detection in Sydney, $0 call-out fee included. You can claim $65 off your first service as a new customer. Our Lifetime Labour Warranty backs the fix.
Frequently Asked Questions
How Can I Check for a Water Leak in Sydney?
You can check for a water leak in three steps: shut every tap and water appliance, read the meter, then wait at least an hour. Sydney Water says any dial movement means a leak.
Do Water Leak Detectors Really Work?
Yes, a plug-in water leak detector works by sounding an alarm when water reaches its sensor, so it suits spots like under a sink. The alarm can't find a pipe leaking inside a cavity.
Who Pays for a Water Leak on My Property?
The property owner pays for a leak under the house, as pipes on the property are theirs. Sydney Water often fixes the stretch from its water main up to one metre inside the boundary, free.
Can Water Leak Detection Avoid Breaking Tiles?
Yes, concealed leak detection can find a leak without breaking tiles to search, because acoustic listening and tracer gas narrow it down first. Only the one marked spot then gets opened for the fix.
How Long Does Water Leak Detection Take?
Detection time comes down to how many water lines cross the property and how hard each one is to isolate. Your own meter check takes at least an hour with every tap off.
How Do I Book Water Leak Detection?
Booking water leak detection in Sydney takes one call to (02) 9073 7896, with your meter reading and water bill on hand. We Find It Leak Detection books Same Day Service for a $0 call-out fee.